top of page
< Back

Making Home Technology Work for the Whole Family

A San Diego homeowner already had several smart-home systems in place, including security devices, lighting controls, thermostats, and home entertainment. He wanted to improve the setup, add a few new features, and make it easier for his family to manage everything.

Some areas needed better Wi-Fi coverage, particularly around the front gate. Other systems needed reprogramming or troubleshooting, and Reza wanted to make sure his wife and children could access the devices they used.

Ameritechs worked across the home’s networking, security, lighting, and entertainment systems, keeping existing equipment where possible and making upgrades where needed.


Extending Wi-Fi to the Front Gate

The home’s network needed to support more than the devices inside the house. The front gate also needed a reliable connection for its connected controls.


Ameritechs upgraded the network with a UniFi Dream Router, a new switch, and four indoor access points using existing Ethernet cabling. The project also included extending network cabling toward the front of the property for an outdoor access point near the gate.


Rather than rewiring the entire house, the team used existing connections where possible and added new infrastructure where coverage was needed.


Making Gate and Security Access Easier for the Family

The project included several changes to how the family could access and monitor the property.

Ameritechs installed a Ring Access Controller Pro 2 for app-based gate access and configured the gate controls, including a hold-open option.


Two existing door locks were reset with new PINs and mobile access. The security upgrades also included video doorbells and two solar-powered cameras positioned near the pool and garage. The team configured control apps on the homeowner’s phone, his wife’s phone, and the family iPad, so the systems weren’t limited to one person’s device.


Updating Lighting, Temperature, and Entertainment

Other parts of the home needed adjustments rather than complete replacements. Ameritechs programmed the Lutron Smart Bridge, installed three smart lights, reprogrammed existing Nest thermostats, and added a new thermostat downstairs. An Apple TV was also installed and configured in the living room.


Fixing the Smaller Problems Along the Way

Some of the work involved tracking down issues that weren’t immediately obvious. When the main doorbell wasn’t sending notifications to the homeowner’s phone, the technician found that notifications had been disabled in the app. They were re-enabled, and an additional accessory was identified for the chime setup.


The master bedroom TV was also having trouble playing Netflix, even though other streaming apps worked. After checking the network and reinstalling Netflix, playback worked again.


Ameritechs also adjusted doorbell mounting hardware, worked on the gate’s relay controls, and added a network switch in the game room. There were smaller service items, but they were part of getting the home’s existing equipment working properly.


A More Manageable Setup for the Whole Household

By the end of the documented work, Ameritechs had addressed several parts of the owner’s home technology, from networking and gate access to security cameras, lighting, thermostats, and entertainment.


The project combined new installations with adjustments to equipment already in place. Just as importantly, the control apps were configured across the family’s devices so more than one person could use the systems.


If you have multiple systems at home that need attention, Ameritechs can assess what’s already installed, identify what’s causing problems, and help you decide what needs to be repaired, reconfigured, or upgraded.

IMG_6717.jpeg
HCPImage_1789418128436.jpeg

​

bottom of page